Trimloss CONSISTENTLY outperforms, in the ENTIRE WORLD, ALL other cutting optimisation
software for flat glass. It not only gives the LOWEST MATERIAL COSTS, but also aims
to give the LOWEST LABOUR COSTS AND WORK THROUGHPUT TIMES (OFTEN AS LOW AS A THIRD
OF THOSE USING OTHER SOFTWARE), by organising the complete flow of all the work in
progress in just the same way as a motor car assembly plant. It can do this in any
combinations of annealed glass, toughened glass, single, double, stepped, triple
or quadruple sealed units, both rectangular and shaped, with different spacer bar
materials, colours and thicknesses and spacer insets, and also for Georgian, leaded
and artwork sealed units. All this is done with no sorting requirements in administration,
the minimum of glass handling, the minimum of toughening bed loads, and consistently
higher toughening bed yields, thus yielding higher toughening quality with lower
rejection rates, whilst still keeping a fixed orientation of any roller wave in the
finished windows. Trimloss is therefore also very advanced toughened glass software.
No other glass optimiser has all these features.
Because every single production operation is worked out in advance of the work being
submitted to the shop floor, work in progress times and work completion times are
accurately predictable. This eliminates the need for cumbersome production monitoring
systems, which if used would only serve to slow down production. This advanced accurate
planning of all work in progress therefore emulates a highly organised motor car
assembly plant, operating a “just in time” system. If any work does go astray, a
gap in a slot rack will immediately identify the missing item, enabling quick remakes
to be initiated. All this improved organisation usually means that much shorter
lead times are achievable.
You don’t have to believe our performance claims. You can prove at least the greater
material savings for yourself, by carrying out trial runs against rival optimisers
and then observe the productivity savings from the fact that Trimloss allows batches
with the full mixture of work types with maximum continuity and efficiency. Press
the “Compare Your Current Optimiser” button on the left, to see how much of your
current waste is avoidable.
Try also pressing the “Supporting Acts” button on the left, to see extra products
for Glass Racking, Break Out Displays, Superspacer Line Software, Optimised Spacer
Bar Cutting and Energy Labels, which can all help the profitability of a glass shop.
Rival software solutions often try to catch up with the disorganised and random work
scheduling priorities practised by the worst production managers. Chasing round the
shop floor to fill in for the limited production controlling ability of competitor’s
software is something we do not advocate - let’s make that quite clear. Thinking
software like Trimloss, is the solution. After simple shop floor staff training,
batches of orders can then be given production slots and their completion times accurately
The “About Expected Trimloss Productivity” button on the left, quantifies the improved
performance we know can be achieved with Trimloss.
Alternatively, e-mail us with your contact details so that we can work out your approximate
glass waste and productivity figures and therefore your potential profit improvements.
We don’t massage your ego with bull ***t. We simply tell the truth for your benefit,
ENFORCEMENT DAY FOR CE MARKING ON ALL SEALED UNITS, IS HERE. Building regulations
had previously been flouted by many sealed unit manufacturers. Forced compliance
will now make efficient Trimloss quality operation mandatory.
We do not put tracking cookies on your computer.
We never have and we never will.
The FREE CONTENT of this web site can greatly help avoid the failure of sealed unit
companies, as well as greatly helping their profit margins.
If you seek reinforcement that your choice of glass software was good,
when it isn’t UPS or Trimloss, you are going to be VERY DISAPPOINTED.